Programming Section; P1 Start With Preset Time - EOS EMOTEC HCS 9003 Instructions De Montage Et D'emploi

Programming section

P1
Start with preset time
You can use the time pre-selection to start your sauna within the next 24 hours.
Always ensure that no objects are located on the sauna heater at the start of
the heating process. Risk of fi re!
For the heating adjustment please press
„Mode"button. In the display appears the
pre heating time symbol and „P1".
Please confi rm with the „Mode" button.
Use the buttons „ „ and „ „ to set the re-
quired value in 10 minutes steps.
Please consider that the cubicle must heat
up for around 40-50 minutes to achieve an
appropriate temperature. If, for example,
you want to start your sauna at 18.00 se-
lect the preset time to 17.10.
Please confi rm with a long press on the
„Mode" button until the new value is fl as-
hing on the display.
The P1 program function is displayed on
the screen briefl y.
While P1 is displayed on the screen press
the button until the preset time icon fl as-
hes. This starts the preset mode.
After a short time the screen displays the
current time and preset heating time alter-
nately. The screen's background lighting
goes out.
When the preset time is reached the sau-
na equipment switches itself on. At the end
of the heating period the control unit auto-
matically switches the device off.
56
P
15:07
17:10
17:10
P
20:03
GB
1
1
17:10