F3 Programming The Reheating Temperature After Humid Operation - EOS EMOTEC HCS 9003 Instructions De Montage Et D'emploi

F3 Programming the reheating temperature after humid operation

The factory sets the reheating temperature
to 95°C. This means that after humid ope-
ration the furnace heats up to 95°C during
the pre-selected reheating time to dry the
cubicle.
For post heating temperature adjustment
please press „Mode" and „ " button
synchron.
(In the display appears „F1" and the clock
symbol.) Afterwards press „ „ button until
„F3" in the display appears.
Please confi rm with the „Mode" button.
Please chose the wished value with the „
„ and „ „ buttons.
Please confirm with a long press on the
„Mode" button until the new value is fl ashing
on the display.
Afterwards the displays shows „F3" for short
time. The post heating temperature is now
fi xed with the new value.
52
F
F
GB
1
3
95
80
80