Deactivating The Preset Time; P2 Preset Time Mode - EOS EMOTEC HCS 9003 Instructions De Montage Et D'emploi

Deactivating the preset time

To deactivate the preset time, press the
sing the button again switches the sauna heater off.

P2 Preset time mode

The heating time limiter is fi xed at 6 hours.
After these time the sauna will automatic
shut-off.
For the heating time limiter adjustment ple-
ase press „Mode" button.
Afterwards the „ „ button until in the dis-
play the the heating time symbol and „P2"
appears.
Please confi rm with the „Mode" button.
Please chose the wished value with the
„ „ and „ „ buttons.
Please confi rm with a long press on the
„Mode" button until the new value is fl as-
hing on the display.
Afterwards the displays shows „P2" for
short time. The heating time limiter is now
fi xed with the new value.
button. This switches the sauna heater on. Pres-
P
06:00
03:00
03:00
GB
2
57