Default Parameters; Finnish Sauna Operation; Temperature Indicator; Heating Time - EOS EMOTEC HCS 9003 Instructions De Montage Et D'emploi

Default parameters

Finnish sauna operation

After switching on the screen displays the
current time and remaining heating time al-
ternately.

Temperature indicator

The temperature is indicated on the right
side of the screen above the thermometer
icon.
Here the pre-selected temperature is indi-
cated by an arrow to the right of the ther-
mometer.
The temperature in the cubicle is shown by
the rising thermometer.
When heating the cubicle the thermome-
ter fi lls up to the pre-selected temperature.
Then the control phase starts.

Heating time

the factory setting limits the heating time
to 6 hours. This means that after switching
on, the device switches off after 6 hours for
safety reasons.
The remaining heating time is displayed
on the screen alternately with the current
time.
48
20:03
05:58
20:03
05:58
GB
Pre-selected
temperature
Actual temperatu-
re in the cubicle