F6 The Optional Humidity Sensor - EOS EMOTEC HCS 9003 Instructions De Montage Et D'emploi

F6 The optional humidity sensor

To activate or deactivate the F2 humidity
sensor (after new installation or after error)
please press „Mode" and „ " button
synchron.
(In the display appears „F1" and the clock
symbol.) Afterwards press „ „ button until
„F6" in the display appears.
Please confi rm with the „Mode" button.
Please chose the wished value with the „
„ and „ „ buttons.
1: Humidity sensor activated
0: Humidity sensor deactivated
Please confirm with a long press on the
„Mode" button until the new value is fl ashing
on the display.
Afterwards the displays shows „F6" for
short time. The fi gure is now fi xed with the
new value.
54
F
F
GB
1
6
0
1
1