Disposal Of Waste Materials; Troubleshooting - Videotec ULISSE COMPACT Manuel D'instructions

13 Disposal of waste
materials
This symbol mark and recycle system
are applied only to EU countries and not
applied to the countries in the other area of
the world.
Your product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
62

14 Troubleshooting

Ask for assistance from skilled personnel if:
• The unit is damaged after being dropped;
• There is noticeable deterioration in performance
of the unit.
• The unit does not work properly, even though
all the instructions in this handbook have been
followed.
The product does not go on.
PROBLEM
Wiring error, blown fuse.
CAUSE
SOLUTION Make sure the connections are
correct. Check the continuity of the
fuses and replace them with the
indicated models should they fail.
The saved preset positions do
PROBLEM
not correspond to the camera
range.
Loss of absolute position reference
CAUSE
point.
SOLUTION Follow the calibration procedure for
Pan & Tilt from the keyboard (refer
to the relative manual) or reset the
unit by switching it on and off.
MNVCUCZ_1511_EN