Autopan; Patrol; Motions Recall - Videotec ULISSE COMPACT Manuel D'instructions

9.3.7.1 Autopan

In the Autopan subsection it is possible to specify the
preset autopan start and end..
It is possible to set the speed with which the distance
is to be covered.
Fig. 106

9.3.7.2 Patrol

In the Patrol subsection it is possible to specify the
preset patrol start and end. It is possible to specify
whether the scan of the presets needs to be carried
out randomly or otherwise.
Fig. 107
50

9.3.7.3 Motions Recall

In the Motion Recall subsection it is possible to
specify a time interval of inactivity after which Pan
& Tilt will carry out one of the following functions:
return to Home position, start autopan or start patrol.
Fig. 108
MNVCUCZ_1511_EN