Display Menu; Options Menu - Videotec ULISSE COMPACT Manuel D'instructions

9.1.11 Display Menu

1. PTZ Positions: If not on OFF, it is used to select
how the Pan, Tilt and Zoom positions are
displayed on the screen. It is possible to select
timed (1 S, 3 S and 5 S) or constant (CONST)
display.
Preset Name: If not on OFF, it is used to select
2.
how the text associated with the last-reached
Preset position is displayed on the screen. It
is possible to select timed (1 S, 3 S and 5 S) or
constant (CONST) display.
Areas Name: If not on OFF, it is used to select
3.
how the texts associated with active areas are
displayed. It is possible to select timed (1 S, 3 S
and 5 S) or constant (CONST) display.
4. Pan & Tilt ID: If not on OFF, it shows the ID of
the pan & tilt.
Received Commands: If not on OFF, it is used
5.
to select how the received serial commands are
displayed. It is possible to select timed (1 S, 3 S
and 5 S) or constant (CONST) display.
Horizontal Delta: This moves the menu texts
6.
horizontally, for better centring.
MNVCUCZ_1511_EN
Vertical Delta: This moves the menu texts
7.
vertically for better.
DISPLAY
------------------------
1>PTZ POSITIONS
2 PRESET NAME
3 AREAS NAME
4 UNIT ID
5 RECEIVED COMMAND:CONST
HORIZONTAL DELTA:
VERTICAL DELTA
Fig. 76

9.1.12 Options Menu

Ceiling Mount: When this mode is enabled the
1.
image and the movements controls are turned
upsidedown.
Alarms: Allows access to the Alarms menu.
2.
Washer: Allows access to the Washer menu.
3.
OPTION
------------------------
1>CEILING MOUNT
2 ALARMS
3 WASHER
Fig. 77
: 1 S
: 3 S
: OFF
:CONST
3
: 3
:N
>
>
41