Display And Electronics; Mains Connection; Motor Connection - Kerbl HAPPYCOW Uno Mode D'emploi

6.3 Display and electronics

The control and display are not visible from the outside on this machine. To gain access to the display and control, the machine must be swung
away from the basic platform, as shown in Figure 4 and 5.
The display serves to indicate the operating status (faults).
The electronics control activation, the safety shut-off and the cycle length.
Figure 7: Circuit board connection diagram with capa-
citor - Uno

Mains connection

L (brown)
N (blue)
PE-GR (yellow/green)

Motor connection

PE-GR (yellow/green)
No. 1 (black)
No. 2 (black)
No. 3 (black)
No. 4 (black)
5
3
4
44
1 – Dip switch element
2 – Display
3 – 6.3A fuse - L
4 – 6.3A fuse - N
5 – Capacitor
1
Bridge
Sensor connection
No. 1 (black)
No. 2 (black)
2