Product Description; Intended Use; Description Of Automation; Description Of Equipment - Nice MhouseKit GD0N Instructions Et Avertissements Pour L'installation Et L'utilisation

STEP 2

2.1 - INTENDED USE

GD0N is a set of components designed for the automation of sectional or
overhead doors in residential applications.
Any applications other than those described above or in different
conditions from those specified in this manual are forbidden.
GD0N operates with electric power. In the event of a power failure, the
gearmotor can be released using a suitable cord in order to move the
door manually.
1
A
B

2.3 - DESCRIPTION OF EQUIPMENT

GD0N can consist of the devices shown in figure 2; immediately make
sure that they correspond to the contents of the package and verify the
integrity of the devices.
N.B.: to adapt the GD0N to local regulations, the contents of the pack-
age may vary; an exact list of the contents is shown on the outside of the
package under: "Mhousekit GD0N contents".
Component and accessory list:
A) 1 GD0N electromechanical gearmotor with incorporated control unit
B) head with pinion
C) carriage and release cord
D) 6 m belt
E) leaf bracket
F) 1 guide, 3 meters long, in 3 section
G) 2 coupling profiles
H) 2 ceiling brackets

PRODUCT DESCRIPTION

2.2 - DESCRIPTION OF AUTOMATION

To clarify a few terms and aspects of a sectional or overhead door auto-
mation system.
In Figure 1 we provide an example of a typical GD0N application:
A) FL100 flashing light with incorporated aerial (optional)
B) KS100 key-operated selector switch (optional)
C) Pair of PH00 photocells (optional)
D) Mechanical stops
E) GD0N gearmotor
C
I) Miscellaneous small parts: mechanical stops, fasteners, etc.; see
tables 1, 2, 3 and 4 (*)
L) 1 GTX4 radio transmitter
M) PH00 pair of wall-mounted photocells
N) KS100 keyswitch
O) FL100 flasher with integrated antenna
* The screws required for mounting GD0N are not supplied as they
depend on the type of material and its thickness.
D
E
English – 5