Before Installing The Hood; Wall Framing For Adequate Support - AVG VIRGINIA AVV-309S Instructions D'installation Et Guide De L'usager

BEFORE INSTALLING THE HOOD

For the most efficient airflow exhaust, use a straight run or as few elbows as possible.

Vent unit to the exterior only.

At least two people are required for installation.

Remove the range hood from the carton packaging and place on a flat surface for assembly.

CAUTION
THIS APPLIANCE SHOULD BE PROPERLY GROUNDED.
This hood must be power supplied 120 V, 60 Hz, and connected to an individual, properly grounded

circuit (3-prong outlet).
If the electrical supply does not meet above requirements, call a licensed electrician before

proceeding.
Route house wiring as close as possible to the installation location, in the ceiling or back wall.

The hood must be connected to the house wiring in accordance with the local codes and norms.


WALL FRAMING FOR ADEQUATE SUPPORT

THIS VENT HOOD IS HEAVY. ADEQUATE STRUCTURE AND SUPPORT MUST BE PROVIDED IN ALL TYPES OF
INSTALLATION. IF MOUNTING ONTO DRY WALL, IT IS RECOMMENDED THAT THE HOOD BE SECURED TO
VERTICAL STUDS IN THE WALL OR TO A HORIZONTAL SUPPORT.
WARNING
BE CAREFUL WHEN INSTALLING THE HOOD, AS IT MAY HAVE SHARP EDGES. WE RECOMMEND THAT YOU WEAR
PROTECTIVE GLOVES.
CAUTION
DO NOT REMOVE THE PROTECTIVE PLASTIC FILM COVERING THE HOOD AT THIS STAGE.
All manuals and user guides at all-guides.com
22