Operating The Hood - AVG DAKOTA-AVD-306PSB Instructions D'installation Et Guide De L'usager

5. Connect the light wire and assemble the outer glass frame panel.
6. Install the exhaust duct on the outlet and direct it outside.

OPERATING THE HOOD

Power-on: once the hood is connected to the main supply, the backlights will turn on, output will
be closed and the unit will enter into the "standby" mode.
Power button
1.
Once you press the Power button
at the low speed; press power button again and the backlight, lights and the hood will be turned off and
return into "standby" mode.
PIC 4
the backlight and lights will be turned on and the hood will work
SEE PIC 4.
21