Installation Instructions; Parts Included; Before Installing The Hood - AVG AVI-366IS – IOWA Instructions D'installation Et Guide De L'usager

INSTALLATION INSTRUCTIONS

TOOLS NEEDED TO INSTALL THE RANGE HOOD

Safety gloves and goggles

Electrical drill

Phillips screwdriver

Flathead screwdriver

Hammer

Adjustable wrench

Sheet metal sheers
PARTS INCLUDED
Type A
(For sheet rock only)
Length: 1-3/5"
Qty: 4 pcs
DIMENSIONS
BEFORE INSTALLING THE HOOD

For the most efficient airflow exhaust use a straight run or as few elbows as possible.

Vent unit to the outside only.

At least two people are required for installation

Remove the range hood from the carton packaging and place on a flat surface for assembly.
Type B
(Connect to type A)
Length: 1-3/10"
Qty: 4 pcs
20

Needle nose pliers

Scissors (to cut duct tape)

Duct tape

Marker or pencil

Level

Measuring tape
Type C
(For Ducting Transition)
Length: 1/2"
Qty: 66 pcs