Armrests; Backrest Extension; Storage Box - Grammer MAXIMO Evolution Dynamic Mode D'emploi

Seat functions and operation
* if fitted ** depending on model
26

Armrests

The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate the
round cap (see arrow) from the cover, loosen
the hexagon nut (size 13 mm) behind it and
adjust the armrests to the desired position (5-
steps) and tighten the nut
again (25Nm). Replace the cap onto the nut.
929

Backrest extension

The backrest extension can be individually
adjusted for height by pulling it upwards over
the various increments up the end stop.
To remove the backrest extension, pull it
upwards over the end stop.
931

Storage box

1.
The storage box is placed on the rear upper
side of the backrest.
2.
To open the storage box, first pull the fixing
lug upwards (1.) and then, fold the cover of
the storage box backwards (2.).
928
*** optional extra
GB