Publicité
Les langues disponibles
Les langues disponibles
* if fitted
** depending on model
24
Armrests * ***
The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13 mm) behind
it and adjust the armrests to the desired
position (5-steps) and tighten the nut
again (11Nm). Replace the cap onto the nut.
WARNING:
If the belt roller is fitted, do not install the
armrest in the lowest position as otherwise
the belt roller might not function correctly.
Carry out a functional test of the belt roller.
Armrest adjustment *
The inclination of the armrests can be
modified by turning the adjustment knob.
When turning the knob to the outside the front
part of the armrest will be lifted, when turning
the knob to inside it will be lowered.
Backrest extension * ***
The backrest extension can be individually
adjusted for height by pulling it upwards over
the various increments up the end stop.
To remove the backrest extension, pull it
upwards over the end stop.
*** optional extra
GB
Publicité
Chapitres
