Seat functions and operation
* if fitted
** depending on model
22
Armrests * **
The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, seperate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13mm) and ad-
just the armrest to the desired position and
tighten the nut again.
Backrest extension * ** ***
The backrest extension can be individually
adjusted for height by pulling it upwards over
the various increments up to the end stop.
To remove the backrest extension, pull it over
the end stop.
Backrest extension * ** ***
The backrest extension must be pushed in as
far as it will go.
The backrest extension can be removed if re-
quired by simply pulling it out.
*** optional extra
GB