Armrests; Headrest; Lumbar Support - Grammer MSG97AL/722 Mode D'emploi

Seat functions and operation
* if fitted ** optional extra
22

Armrests * **

The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13mm), adjust
the armrest to the desired position and tighten
the nut again. Press the previously separated
cap cover back onto the nut.

Headrest * **

The headrest can be individually adjusted for
height by pulling it upward over the various
increments up the end stop.
By pushing foreward or rearward the angle of
the headrest can be adjusted individually.
To remove the headrest, pull it over the end
stop.

Lumbar support *

By turning the adjustment knob to the left or
right, both the height and curvature of the
backrest cushion can be individually adjusted.
This increases both the seating comfort and
the performance of the driver.