Armrest Adjustment; Armrests; Headrest - Grammer AVENTO PRO AIR 930 Mode D'emploi

Seat functions and operation

Armrest adjustment *

The inclination of the armrests can be
modified by turning the adjustment knob.
When turning the knob to the outside the front
part of the armrest will be lifted, when turning
the knob to inside it will be lowered.

Armrests * ***

The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13 mm) behind
it and adjust the armrests to the desired
position (5-steps) and tighten the nut again
(25Nm). Replace the cap onto the nut.

Headrest * ***

The headrest can be individually adjusted for
height by pulling it upward over the various
increments up the end stop.
By pushing foreward or rearward the angle of
the headrest can be adjusted individually.
To remove the headrest, pull it over the end
stop.
* if fitted ** depending on model *** optional extra
27