Lumbar Support; Backrest Adjustment; Armrests - Grammer MSG85/721 Mode D'emploi

Seat functions and operation
* if fitted
26

Lumbar support *

By turning the adjustment knob to the left or
right, both the height and curvature of the
backrest cushion can be individually adjusted.
This increases both the seating comfort and
the performance of the driver

Backrest adjustment

Pull up the locking lever to release the
backrest catch. When releasing the backrest
catch, do not apply load to the backrest by
pressing against it.
By exerting pressure on or off the front or rear
part of the seat pan it can be moved to the
desired position. Release the locking lever to
lock the backrest.
It should not be possible to move the
backrest into another position after it has
been locked.

Armrests *

The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, seperate
the round cap (see arrow) from the cover.
Loosen the hexagon nut (size 13mm) and
adjust the armrest to the desired position and
tighten the nut again.
GB