Backrest Adjustment; Armrests* (Optional Extra); Removal And Installation Of Upholstery - Grammer MSG 10 Mode D'emploi

Seat functions and operation

Backrest adjustment

The backrest is adjusted using the locking
lever (arrow).
The locking lever must latch into the
desired position. It should not be possible to
move the backrest into another position when
it is locked.
Adjusting the backrest angle will also alter the
fore/aft setting for the seat cushion at the sa-
me time.
Armrests*
(optional extra)
The armrest can be folded up if required.
Removal and installation of up-
holstery
To remove the upholstery, undo the screws
on the seat and backrest and take out the
seat cushion.
The upholstery is refitted in the same way in
reverse order.
* if fitted
MSG 10/12/20 21
GB