Seat Heater And Seat Ventilation; Lumbar Support; Armrests - Grammer ACTIMO EVOLUTION Mode D'emploi

** depending on model
GB
Seat functions and operation

Seat heater and seat ventilation **

The seat ventilation system makes sure that
the seat surface remains dry. Humidity in the
contact area of the seat will be taken away.
This ensures a comfortable, cool and clean
seat feeling.
Operate this switch to activate or deactivate
the seat heater and the seat ventilation.
0 Seat heater and seat ventilation OFF
1 Seat heater ON (seat ventilation OFF)
2 Seat ventilation ON (seat heater OFF)

Lumbar support **

With the upper and lower switch the curvature
in the upper and lower area of the backrest
upholstery can be individually adjusted.
This increases both the seating comfort and
the performance of the driver.
The lumbar support curvature can be
increased pressing "+" or reduced by pressing
"–" on the relevant switch.
When the backrest upholstery does no longer
react to pressing "+", the maximum curvature
has been reached and the switch should be
released.

Armrests

The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13 mm) behind
it and adjust the armrests to the desired
position
(5-steps) and tighten the nut again (25Nm).
Press the cover cap back into the cover.
27