Armrests; Backrest Extension - Grammer COMPACTO Basic W Mode D'emploi

Seat functions and operation

Armrests * ***

The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate the
round cap (see arrow) from the cover, loosen
the hexagon nut (size 13 mm) behind it and
adjust the armrests to the desired position (5-
steps) and tighten the nut again (25Nm).
Replace the cap onto the nut.

Backrest extension * ** ***

The backrest extension can be individually
adjusted for height by pulling it upwards over
the various increments up the end stop.
To remove the backrest extension, pull it
upwards over the end stop.
Backrest extension * ** ***
The backrest extension must be pushed in as
far as it will go.
The backrest extension can be removed if
required by simply pulling it out.
* if fitted ** depending on model *** optional extra
GB
23