Seat Functions And Operation; Weight And Height Adjustment; Absorber - Grammer MAXIMO Evolution Dynamic Mode D'emploi

Seat functions and operation

Weight and height adjustment

The seat is adjusted for the driver's weight
automatically when the driver takes place on
the seat. For this reason no additional
handling is required.
The seat height can be set pneumatically and
is continuously adjustable.
Pull or press this handle to move the seat
upwards or downwards. If adjustment reaches
922
the top or bottom end stop, the height will be
adjusted automatically, so as to ensure a
minimum spring travel.
Release the handle, when the desired height
position or the upper end stop is reached.
In order to avoid compressor damage
during height adjustment or until the upper
end stop is reached, the compressor must be
operated for 1 minute at the maximum.

Absorber

The absorber setting of the seat can be varied
to suit the on and off-road driving conditions.
The shock absorber settings are adjusted
automatically during travel.
It is not necessary to operate a control
element to carry out the adjustment.
924
* if fitted ** depending on model *** optional extra
GB
23