Armrests; Headrest - Grammer BOOTSITZ AVENTO Premium Instructions De Montage Et Mode D'emploi

Seat functions and operation
* if fitted
28

Armrests *

The armrests can be folded back if required and
the height individually adjusted.
To adjust the armrests for height, separate the
round cap (see arrow) from the cover, loosen
the hexagon nut (size 13 mm) behind it and
adjust the armrests to the desired position (5-
steps) and tighten the nut
again (11Nm). Replace the cap onto the nut.
WARNING:
If the belt roller is fitted, do not install the
armrest in the lowest position as otherwise the
belt roller might not function correctly.
Carry out a functional test of the belt roller.

Headrest *

The headrest can be individually adjusted for
height by pulling it upward over the various
increments up the end stop.
By pushing foreward or rearward the angle of
the headrest can be adjusted individually.
To remove the headrest, pull it over the end
stop.
GB