Troubleshooting; Possible Causes - Sogeco B-CHEF 0523E Serie Instructions D'installation, D'utilisation Et D'entretien

2.6 Troubleshooting

2.6 Troubleshooting
Cooking chamber
heating does not
operate
Temperature control
incorrect
Fan motor does not
operate
Oven disabled
Incorrect amount of
steam produced

Possible causes

• Safety thermostat tripped.
• Temperature control thermostat faulty.
• Heating elements contactor faulty.
• Timer faulty.
• Wires to heating elements disconnected or fuses tripped.
• Defective flame control device orburner ignition electrodes faulty.
• Gas lack or wrong pressure.
• Holes burner or nozzle or lead gas obstructed.
• Motor faulty.
• Door not fully closed or door micro-switch out of order.
• Thermometer faulty.
• Termperature control thermostat faulty.
• Thermostat bulb faulty or not in place.
• Thermal overload cut-out tripped.
• Wires disconnected or fuses tripped.
• Capacitor faulty.
• Door not fully closed.
• Fan timer faulty.
• Electric supply interrupted.
• Auxiliary fuses tripped.
• Engine protection thermal cutout tripped.
• Door micro-switch faulty.
• Incorrect main plug polarity in gas ovens.
• Mains water supply incorrect.
• Electrical valve fault.
• The pressure reducer is obstructed.
• Energy controller for steam production faulty or not calibrated.
47
GB