Fill The Generator With Engine Oil - Endress Professional GT Serie Notice D'utilisation

Refuelling the device
4.4

Fill the generator with engine oil

Requirements
Refuel the generator as follows:
1. Turn the fuel cock to "OFF".
2. Unscrew tank cover.
3. Lead the filling aid into the tank.
4. Fill in petrol.
5. Remove the filling aid.
6. Screw on tank cover
 The device is refuelled.
CAUTION!
The generator is always delivered without any engine
oil in it.

it is not possible to start the generator if the oil level is
too low since the engines are fitted with oil level
monitoring.
These requirements must be fulfilled:

The device must be shut off.

The device must be cooled down.
CAUTION!
Leaking engine oil can contaminate the soil and
groundwater.

Do not fill up the crankcase to the maximum (check the
fill level at the oil dipstick).

Use a filling aid.
Commissioning
Fill the generator with engine oil
23