Commissioning; Transporting The Generator - Endress Professional GT Serie Notice D'utilisation

Commissioning

Transporting the generator

4 Commissioning
4.1 Transporting the generator
Requirements
Carrying the generator
20
The operation of the generator is described in this section.
Proceed as follows to transport the generator.
These requirements must be fulfilled:

The generator must be turned off

The generator must have cooled down

The fuel cock is in the position "Closed"
CAUTION!
A sliding away or falling device can crush the hand and
feet.

Note the weight of the machine varying between 41 to
86 kg
(depending on the model).

The device must be carried by 2 (ESE 206 / 306 HS-GT)
or 4 persons (ESE 406 / 606 (D) HS-GT (ES) )

Walk slowly.

Do not place your feet under the device
1. Grip the device on the support frame.
2. Lift the generator.
3. Carry generator to place of work.
4. Set down the generator.
5. Let go of the support frame.
 The generator has been carried to its place of work.