Qualification And Duties; Personal Protective Equipment; Danger Zones And Work Areas - Endress Professional GT Serie Notice D'utilisation

2.2

Qualification and duties

2.3

Personal protective equipment

2.4

Danger zones and work areas

Life cycle
Transport
Operation
Service and
maintenance
All work performed on the generator may only be performed
by persons suitably qualified to do this.
These must,

be familiar with the accident prevention regulations and
generator safety instructions and able to apply them.

have read the chapter "General safety regulations".

have understood the contents of the chapter "General
safety regulations".

must know how to practically use and implement the
contents of chapter "General safety regulations"..

must have understood the technical documentation and
must know how to implement it in practice.
This personal protection equipment must be worn during all
activities at the generator described in these operating
instructions:

Hearing protection

Protective gloves
The danger zones work areas on the generator are
determined by the activities to be performed within the
individual life cycles:
Activity
In the vehicle
By the operating
personnel
Setting up
Operating
Refuelling
Cleaning
Shutting down
Maintenance
Table 2.1: Danger zones and work areas on the generator
General Safety Regulations
Danger zone
Within a radius
of 1.0 m
Within a radius
of 5.0 m
Within a radius
of 2.0 m
Within a radius
of 1.0 m
Qualification and duties
Work area
none
Within a radius
of 1.0 m
11