Setting Up The Generator - Endress Professional GT Serie Notice D'utilisation

4.2

Setting up the generator

Requirements
Setting up the generator
Proceed as follows to set up the generator.
These requirements must be fulfilled:

An even and firm substratum outdoors

There are no inflammable materials at the place of work

There are no explosive materials at the place of work

The device must be installed freely (it must not be
covered)
CAUTION!
Leaking engine oil and petrol can contaminate the soil
and groundwater.

Prevent leaking of engine oil and petrol.
The generator is set up as follows:
1. Prepare the work site.
2. Transport the generator to the work site.
3. Secure the generator against tipping over / slipping if
necessary.
 The device is in position.
Commissioning
Setting up the generator
21