Skandika CardioCross Carbon Conqueror Mode D'emploi page 36

ASSEMBLY INSTRUCTIONS
2b
Install left and right handle bars
1. Fix left and right handle bars (14 & 15) on left and right lower handle bars with 3 screws (101),
2 curved washers (135) and 3 nuts (120) by using wrench (145 & 146) on each side.
2. Connect upper resistance wire (44) to lower resistance/incline switch cable (46) and store it
inside the frame tube. Put wire cap (84) onto the console mast. Now connect upper incline
wire (45) to lower resistance/incline switch cable (46) and store it inside the frame tube. Put
on wire cap (84).
36