Skandika CardioCross Carbon Conqueror Mode D'emploi page 34

ASSEMBLY INSTRUCTIONS
1
1. Feed the computer cable (39) through the console mast (12) from below and then fix the console
mast (12) to the mounting plate on the main frame with 4 screws (109), 4 spring washers (136) and 4
washers (133) using the Allen wrench (148).
2. Connect computer cable (39), handpulse cables (41) and handle wires (44 & 45) to console (38). Fix
the console (38) on the console mounting plate with 4 screws (111) - be careful not to damage the
cables!
3. Place left and right Lower Handle Bars (10 & 11) onto left side and right side of console mast shafts
and secure with screws (99) and flat washers (132) with the help of the wrench (146).
34