Using The Patient Programmer; Synchronizing And Displaying The Therapy Screen - Medtronic InterStim iCon 3037 Manuel D'utilisation

Using the patient
programmer
Synchronizing and displaying
the Therapy screen
Synchronizing sends information between
your neurostimulator and patient
programmer. All communication with the
neurostimulator begins with
synchronization.
• To synchronize your neurostimulator and
the patient programmer, hold the
programmer over your neurostimulator
with the screen facing outward and press
the Neurostimulator on key, the
Neurostimulator off key, or the Sync key
as shown in Figure 2.3.
Notes:
– Using the Neurostimulator on key to
synchronize, also turns on the
neurostimulator.
2016-06-01 3037 English
33