Replacing Of Power Supply Cord; Maintenance Materials; Shut-Down - EKOM Invent DK50 DI Manuel De L'utilisateur

MAINTENANCE
 Use a flat screwdriver to remove the fuse holder.
 Replace the broken fuse. Use the correct type and value, see Chapter
Maintenance material.
 Put in the holder with fuses

Replacing of power supply cord

Device with a damaged power cord should not be used. Replace the
defective power cord with a new one. Use the correct cord type, see the
Chapter Maintenance material.

Maintenance materials

Inlet filter
Filter cartridge AAF 03528 cMP
Suction filter 05W POLYESTER
KIT DI 5K
KIT DI 10K
Battery 9V Li-MnO2 - Non-Rechargeable
Fuse T8A, 250V, model 100V a 120V
Fuse T6,3A, 250V, model 230V
Power supply cord CE, 6051.2094
Power supply cord CE, 6051.2003 black
Power supply cord UK, 6051.2008
Power supply cord US 120V, 6051.2095
Power supply cord US 230V, 6051.2001
Power supply cord AU 6051.2030
Power supply cord CN, 6051.2032

SHUT-DOWN

If the compressor is not going to be used for a long period of time,
disconnected it from the main power supply and disconnect the pressure
hoses.
24
061000544-000
025200294-000
025200194-000
604041142-000
604041143-000
031500034-000
038100015-000
038100004-000
034300074-000
034130034-000
034130035-000
034130075-000
034130033-000
034130036-000
034130048-000
NP-DK50 DI-17_03-2021