Cleaning And Replacing The Air Inlet Filter; Cleaning The Compressor - EKOM Invent DK50 DI Manuel De L'utilisateur

OPERATION
Operators must quickly secure a backup air source for the patient in the
event any of these signals activate during equipment operation.
Test of the alarm system functionality is performed automatically when
the equipment is switched on by a short testing activation of the visual
and auditory alarm signals (light up of LED indicator and auditory
pulse).

Cleaning and replacing the air inlet filter

At least once a week take out and clean the inlet filter (5) located on the back
side. Wash the filter in warm soapy water, rinse thoroughly and allow it to
dry. Insert the clean filters so that the intake openings are completely
covered by the filters.

Cleaning the compressor

To clean the compressor, use a detergent that contains no abrasives,
chemical solvents or other corrosive agents.
20 NP-DK50 DI-17_03-2021