Never use the safety valve to vent air pressure in the air tank. It could damage
the safety valve. The valve is set to the maximum permitted pressure by the
manufacturer. Adjustments are not permitted!
WARNING! COMPRESSED AIR CAN BE DANGEROUS. WEAR EYE PROTECTION
WHEN VENTING ANY AIR. COMPRESSED AIR MAY DAMAGE THE EYES OR
CAUSE VISION PROBLEMS.
18.7.
Inlet filter replacement
(Fig.18)
Pull out the rubber plug (2) by hand.
Remove the dirty inlet filter (1).
Insert a new filter and replace the rubber plug
18.8.
Filter element replacement
(Fig. 19)
Remove the hose (1) from the quick connector.
Use a wrench (2) to release the filter vessel (3) and remove.
Pull down on the filter element (4) to remove.
Insert a new filter element.
Re-install the filter vessel.
Gently tighten the filter vessel with the wrench.
Re-install the hose on the quick connector.
1
Fig. 19
NP-DK50 PLUS-1_01-2018-MD A
Fig.18
3
2
- 30 -
DK50 PLUS
1
2
4
02/2018