Changing The Programme; Cancelling The Programme; Ending The Programme With Rinse Stop; Programme End - Schulthess SPIRIT ProLine WE 8080 Mode D'emploi

Displays, page 51)
57
Changing the programme before the programme start
u Lightly press the desired programme button once
again.
All pilot lamps for the selected additional functions
flash again and all settings are deleted.
u Select any additional functions that may be needed.
u Start the programme.

Cancelling the programme

Cancel the programme by repeatedly pressing the
Quick Wash button until the «Programme end» pilot
lamp
flashes.
With child safety guard activated:
u Hold down the start button while selecting a
new programme
When restarting the programme:
u Repeat the detergent addition.

Ending the programme with Rinse stop

You have selected the additional function Rinse stop.
The laundry is lying in the final rinse water. The Softe-
ner pilot lamp flashes in the programme status display.
You have 2 options for finishing the programme:
The laundry is to be spun dry
u If desired, the spin speed can be reduced using the
Spin Speed button.
u Operate the Start button.
The water drains away and the laundry is spun.
The laundry is to be removed while still dripping wet
u Lightly press the Quick Wash button twice.
The rinse water drains away.
With child safety guard activated:
u Hold down the start button at the same time.

Programme end

The programme end is indicated by the display value
0H00 as well as by the flashing «Programme end» pilot
lamp.
Loosening-up phase
The loosening-up phase at the end of the programme
lasts 5 mins. (excl. Wool programme) and prevents the
laundry from becoming creased.

Removing the laundry

During the loosening-up phase:
(Drum continues to turn/Display 0h00)
Lightly press the Quick Wash button again. (Programme
cancellation)
Press the door opening button and
u remove the laundry.