Installing The Appliance - Schulthess WA14 Export Notice D'installation

Removing the transport
securing device
The machine is secured with three
transport safety devices on the back of
the washer.
Important
Before putting the appliance into service
for the first time, the transport securing
device must be removed.
To avoid transport damage, temporarily
►
re­install the safety device when trans­
porting the machine in the future.
Remove the hoses and cables from their
►
holding straps.
Important
In the case of slipping there is a risk of
injury.
46 EN
Loosen hexagonal screws with a spanner
►
(spanner size 13), until the screws can
be moved freely.
Remove the screws with their sleeves.
►
Close the openings with the enclosed
►
covers.
4 x

Installing the appliance

Each appliance is carefully checked un­
der operating con ditions before leaving
our factory. Any moisture or water res­
idue which you may possibly find in the
appliance or outlet hose are attributable
to this check.
3 x