Starting the programme
Selecting programmes
See chapter «Selecting programmes»
Selecting additional functions
See chapter «Additional functions»
Changing a programme before the start
X Press the desired programme button again.
All control lights for the available additional functions
flash again and all settings are deleted.
X Select any additional functions.
Add laundry
Only dry fabrics which have been washed with water in
the dryer.
X Place the laundry loosely in the drum, mixing large
and small items
Start programme
X Press the start button.
The control light is illuminated and the programme
starts automatically.
If the child lock is activated:
X Hold the start button down and press the fast for-
ward button.
Programme progress / Programme status
X With the moisture controlled programmes the damp-
ness of the laundry is continually monitored by an elec-
tronic sampling system.
The programme time remaining is displayed.
This remaining time is recalculated several times during
drying, so the effective programme end will therefore
vary by a few minutes.
X For time programmes, the time remaining to the end
of the programme is displayed.
54
Adding more laundry
This is possible at any time.
X Open the door.
Wait for the drum to stop.
X Add your laundry.
X Close the door again.
X Press the start button.
If the child lock is activated:
X Hold down the start and fast forward buttons at the
same time.
The drying process is continued.
Interrupting the programme
X Interrupt the programme by pressing the fast forward
button repeatedly, until «programme end» appears on
the display.
If the child lock is activated:
X Hold the start button down.
X Simultaneously tip the fast forward button.
Programme end
The programme end is indicated by the display value
00:00h, the display of «Programme End» as well as a
flashing control light.
An audible signal.
(only if the alarm volume is switched on)
The drum continues to rotate periodically after the
programme has ended to prevent the laundry from
creasing (only if crease protection has been switched on,
for 30 or 60 minutes).
The washing should be taken out now at the latest.
Remove the laundry
X Open the door.
X Remove the laundry.
X Clean the filter.
Switch off the machine
X Close the door.
X Switch the machine off at the wall.
If there is not wall switch, the display field will auto-
matically go out after 4 min. and the dryer will switch to
standby mode (only if the standby function is switched
on).