Selecting Residual Moisture Controlled W Programme; Selecting Mangle Moist Programme; Selecting Time Programme; Selecting Wet-Clean Programme - Schulthess Spirit proLine TRI 9250 Manuel

Selecting residual moisture controlled programme
The electronic sampling system continually checks the
current level of dryness of your laundry and automati-
cally stops the programme when it reaches the speci-
fied level of dryness.
u Press the programme button corresponding to the
desired drying level.
l The control light for the selected programme lights
up.
u For easy care fabrics, select the additional «Easy
care» function .

Selecting mangle moist programme

The appliance offers the facility to change the moisture
level by repeated pressing of the «Iron dry 1 and 2»
buttons. 5 levels are possible for each. The display
shows the level selected, whereby the residual moisture
declines as the number increases.

Selecting time programme

Time programme for drying of individual items of laun-
dry or additional drying of previously dried textiles with
a low moisure content.
Set the drying time according to the type of laundry, the
quantity of laundry and the moisture level.
u Lightly press the programme button.
l The time programme pilot lamp illuminates and the
minimum drying time of 3 min. is displayed.
u Select the drying time up to a maximum of 150 min.
by repeated pressing of the button.

Selecting Wet-Clean programme

These programmes serve to dry textiles which have been
washed with the Wet-Clean procedure first.
u Press the button repeatedly until the desired pro-
gramme will appear on the display.
53

Selecting additional functions

By selecting one or more additional functions, you can
tailor your drying programme to the specifics of your laun-
dry (see chapter additional functions).
Changing a programme before the start
u Press the desired programme button again.
l All control lights for the available additional functions
flash again and all settings are deleted.
u Select any additional functions.
Add laundry
Only dry fabrics which have been washed with water in
the dryer.
u Place the laundry loosely in the drum, mixing large
and small items.
Start programme
u Press the start button.
l The control light is illuminated and the programme
starts automatically.
If the child lock is activated:
u Hold the start button down and press the fast forward
button.
Programme progress / Programme status
l With the moisture controlled programmes the damp-
ness of the laundry is continually monitored by an elec-
tronic sampling system.
l The programme time remaining is displayed.
This remaining time is recalculated several times during
drying, so the effective programme end will therefore
vary by a few minutes.
l For time programmes, the time remaining to the end
of the programme is displayed.