Spare Parts And Accessories - Burkert 8011 Manuel D'utilisation

10. spAre pArTs AnD
Accessories
attention
risk of injury and/or damage caused by the use of unsuitable
parts.
Incorrect accessories and unsuitable spare parts may cause
injuries and damage the device and the surrounding area.
• Use only original accessories and original spare parts from
Bürkert.
spare part
seal for metal fitting (Fig. 15)
FKM (DN6 to DN65)
EPDM (DN6 to DN65)
set of 2 o-rings for the end pieces (true
union connections only) + 1 flat seal and 1
o-ring for the se11 electronic module con-
nection (Fig. 16)
FKM - DN8
FKM - DN15
FKM - DN20
FKM - DN25
FKM - DN32
FKM - DN40
FKM - DN50
32
order code
426340
426341
448679
431555
431556
431557
431558
431559
431560
English
Type 8011
Maintenanceandtroubleshooting
spare part
EPDM - DN8
EPDM - DN15
EPDM - DN20
EPDM - DN25
EPDM - DN32
EPDM - DN40
EPDM - DN50
Set of screws: 4 short screws (M4x35 - A4) + 4
long screws (M4x60 - A4)
Accessory
5-pin M12 female connector, moulded on
shielded cable (2 m)
5-pin M12 female connector, to be wired
Fig. 15: Seal for metal fitting
order code
448680
431561
431562
431563
431564
431565
431566
555775
order code
438680
917116