Operating Software; Program Installation - Moeller DE4-COM-2X Manuel

Operating Software

Program Installation

GB-28
• Comparison between the PC parameter set and the
Moeller ex-works setting or current setting. You can easily
recognise the changes made in this manner.
• Complate parameter sets (two parameter sets in the case
of the DF4 series) can be transferred to and from the drive
controller with a single command.
• Parameter settings can be documented either in a file or
on paper. The software includes functions to load, store
and print the settings.
• User-friendly help system which is subdivided into
program help for the DE4-CFG-200 software and drive-
specific help. This provides you with general help during
commissioning and information on drive-specific configu-
ration details and drive parameters, respectively.
• The DE4-CFG-200 software can be easily switched from
German-language to English-language menus and vice
versa.
• Runs under WIN 95/98 and WIN NT 4.0
h DE4-CFG-200 no longer runs under Windows 3.11 or
previous versions.
h In order to transfer all parameters to the DV4, a DE4-
COM-2X from Software version 3.0 is required. DV4 is not
automatically recognised with previous versions. Param-
eter sets 3 and 4 cannot be transferred. Additionally,
parameters with a sub-index cannot be modified.
The program diskette contains a setup program for the
DE4-CFG-1 operating software. The setup program installs
the operating software on the PC. A new folder
"DE4-CFG-200" is created in "Programs" under the "Start"
button.
03/01 AWB823-1279-D/GB/F