Assembly; Items Supplied; Attaching To Drive Controllers - Moeller DE4-COM-2X Manuel

03/01 AWB823-1279-D/GB/F

Items supplied

Attaching to drive
controllers

3 Assembly

After receiving the equipment, immediately check whether
the delivered items match the delivery note. Moeller cannot
be held responsible for claims made at a later date.
The following components are supplied with the interface
module:
• DE4-COM-2X interface module in enclosure (protection
class IP 20)
• Mounting screw M3 × 30 mm
• Assembly instructions with the reference number:
AWA823-1570
This manual consists of:
• Manual with the reference number:
03/01 AWB823-1279-D/GB/F
• The operating software DE4-CFG-200 on a CD
Make a claim immediately:
• If there is any visible transport damage, please contact the
supplier immediately.
• If there are any visible faults or if some of the items are
missing, please contact your local Moeller agent immedi-
ately.
Proceed as follows to attach the interface module to the
drive controller:
Push the interface module carefully onto the front of the
X
drive controller until it clicks into place.
Securely attach the interface module to the frequency
X
inverter using the mounting screw provided. Use a size 1
cross-head screw driver.
GB-25