Manufacturer's Certification; Intended Use - Moeller DE4-COM-2X Manuel

About This Product
Manufacturer's
Certification

Intended Use

GB-8
The electronic interface module DE4-COM-2X described in
this manual is commonly described in an industrial environ-
ment as a "device" or "unit". However, the manufacturer
would like to point out that it is not a ready-to-use unit or
machine as covered by the relevant Device Safety or EMC
regulations or the EC Machinery Directive, and should be
classified as a component. The intended use is only deter-
mined after this component has been connected to other
components provided by the user.
Accordingly, compliance of the final construction with
existing legal regulations is the responsibility of the user.
The interface module DE4-COM-2X may be used as an
accessory for the drive controller models DF4-120, DF4-340,
DF4-341, DM4 and DV4.
The DE4-COM<-2X is used to connect the drive controller to
the interface of a higher-level host computer (PLC or PC).
The interface module may only be used when it is in perfect
working order.
Any changes or modifications to the interface module are
forbidden.
The interface module described in this manual is intended for
use in industrial power installations. It must be securely and
rigidly attached to and electrically connected with the drive
controller in such a way that it meets its intended function
when the equipment operates correctly and it does not
present any danger to operating personnel.
It is also necessary to observe all measures which are speci-
fied in the manual of the drive controller model which is
being used.
03/01 AWB823-1279-D/GB/F