About This Product
GB-10
Operator
The operator is any natural or legal person that uses the
interface module, or for whom the interface module is used
on his/her order.
The operator and/or his/her safety officer must ensure that
• all regulations, warnings and national laws are observed;
• only qualified personnel are allowed to work on and with
the interface module;
• this manual is available to operating personnel during all
phases of work;
• unauthorised persons are prevented from accessing and
working on and with the interface module.
Qualified personnel
Qualified personnel includes persons who as a result of their
training, experience and instruction and their knowledge of
relevant standards, regulations, safety standards and the
operational environment have been authorised by the
person responsible for the safety of the equipment to
perform the required work and are able to recognise and
avoid potential dangers (definition of qualified operators
from VDE 105 or IEC 364).
Please contact your Moeller Branch Office if you have any
questions or problems.
03/01 AWB823-1279-D/GB/F