Power Supply For The Interface Module - Moeller DE4-COM-2X Manuel

Engineering
Power Supply for the
Interface Module
GB-16
Attention!
If you connect the power supply to the interface module
DE4-COM-2X with incorrect polarity, the interface module
will be destroyed.
The interface module can be supplied with power in two
different ways:
• External 24 V power supply connected to the 2-pin plug-
in screw terminals +/
• Internal power supply from the frequency inverter; the
power supply connection is made automatically when the
interface module is plugged onto the drive controller (this
option is not possible with drive controller model
DF4-120)
03/01 AWB823-1279-D/GB/F
(range 15 to 30 V).
–