Introduction - Corghi BRC1T Manuel D'utilisation

INTRODUCTION

The purpose of this manual is to furnish the owner and operator of this Corghi machine
with a set of practical and safe instructions for the use and maintenance of the BR hank-
to-cone machine.
Follow all the instructions carefully and your balancer will assist you in your work and
give lasting and efficient service in keeping with CORGHI traditions.
The following paragraphs define the levels of danger regarding the machine associated
with the warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of serious injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before powering up the machine. Conserve this manual
and all illustrative material supplied with the machine in a folder near the tyre changer
where it is readily accessible for consultation by the machine operator.
The technical documentation supplied is considered an integral part of the machine; in
the event of sale all relative documentation must remain with the jack.
The manual is only valid for the machine model and serial number indicated on the
nameplate applied to the machine itself.
WARNING
Adhere to the contents of this manual: Corghi declines all liability in the case of actions
not specifically described and authorised in this manual.
NOTE
Some of the illustrations in this manual have been taken from photographs of prototypes;
the standard production model may differ slightly in certain respects.
These instructions are meant for persons with a certain level of mechanical and electrical
expertise. We have therefore left out descriptions of simple operations, such as methods
for tightening or loosening the clamping devices. Do not attempt to carry out procedures
which exceed your level of proficiency, or which you do not have experience with. Contact
an authorized service centre for assistance if necessary.
26 User manual BR