Introduction; Key - Corghi AGTT 1600A Manuel D'utilisation

InTroDUCTIon

The purpose of this manual is to furnish the owner and operator with a set of practical,
safe instructions on the use and maintenance of the tyre changer for heavy vehicles.
If these instructions are followed carefully, your machine will give you the efficient and
long-lasting service that has always characterised CORGHI products, thus making your
work considerably easier.
The following paragraphs define the levels of danger regarding the machine, associated
with the warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of serious injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
WARNING
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before powering up the machine. Keep this manual
and all illustrative material supplied with the machine in a folder near the tyre changer,
where it is readily accessible for consultation by the machine operator.
The technical documentation supplied is considered an integral part of the machine, and
must always accompany the equipment if it is sold or transferred to a new owner.
The manual is only to be considered valid for the machine of the model and serial number
indicated on the nameplate applied to it.
WARNING
Adhere to the contents of this manual: The producer declines all liability in the case
of actions not specifically described and authorised in this manual.
NOTE.
Some of the illustrations in this manual have been taken from photographs of prototypes;
the standard production model may differ slightly in certain respects.
These instructions are for the attention of personnel with basic mechanical skills. We have
therefore condensed the descriptions of each operation by omitting detailed instructions
regarding, for example, how to loosen or tighten the fixing devices on the machine. Do not
attempt to perform operations unless properly qualified and with suitable experience.
If in need of assistance, call an authorised assistance centre.

KEY

To make reading easier, please note that:
The AGTT 1600A machine will be called the "AUTOMATIC VERSION"
The AGTT 1600 machine will be called the "SEMIAUTOMATIC VERSION"
34 Operator's manual AGTT 1600A - AGTT 1600