Installation Of The Product - Kemper 83 200 110 Mode D'emploi

NOTE
Ensure that the welding current return line between the workpiece and
the welding machine has a low resistance and that connections between
the workpiece and the product are avoided so that the welding current
cannot flow back to the welding machine via the product's protective
conductor.

5.1 Installation of the product

Carry out the assembly of the product as follows:
1. Screw the two steel profiles (item 1) to the product with the enclosed
fixing material (item 2).
1502518-00
Fig. 29: Mounting – Swivel wall mount bracket
- 73 -
EN