Steca Grid Vision 1800 Manuel page 47

EN
734.144 | Z04 | 2012-11-22
Language
A list of languages supported by the remote display
is displayed. The current language is selected. Use the
UP and DOWN buttons to browse through the lan-
guages and select one of these using the SET button.
Country
The country currently set for the connected inverters is
displayed.
Note
If this view appears then the country is correctly set
and can no longer be changed.
Contrast
This menu item allows you to set the display con-
trast to one of 5 levels. The selected contrast level is
displayed graphically. Use the UP and DOWN buttons
to select a different level. The modified setting is
immediately visible so you can see if the new setting
is correct. Pressing the SET button confirms the new
setting. Pressing ESC discards the new setting and the
display returns to the previous contrast setting.
Backlight
This menu item allows you to set a timer defining
how long the display illumination remains switched
on when no commands are entered. This timer is reset
each time a button is pressed.
You use the UP and DOWN buttons to set a period
defined in seconds and then confirm this value by
pressing the SET button. A value of 60 sec. causes the
display illumination to remain on permanently.
45