General Safety Instructions; Proper Usage - Steca Grid Vision 1800 Manuel

1

General safety instructions

• This document is part of the product.
• Install and use the device only after reading and understanding this document.
• Keep this document in a safe place for the entire service life of the device. Pass this
document on to subsequent owners or operators of the device.
• Adhere to all safety instructions. Consult (further) professional personnel in the
event of any ambiguities.
• Only qualified electricians may install, commission, repair or deinstall this device.
• As soon as it becomes evident that safe operation is no longer possible (e.g. if there
is visible damage), remove the device from the grid immediately.
• Observe the prescribed conditions of use, see Section 12, p. 54.
• Factory labels and markings must never be altered, removed or rendered unreadable.
• This device is not intended for children or persons with physical, sensory, or mental
disabilities.
2

Proper usage

The StecaGrid Vision remote display, subsequently referred to as the remote display, is
exclusively designed for connection to the following inverters:
• StecaGrid 1800/2300/3010/3000/3600/4200 and StecaGrid 2020
• StecaGrid 8000 3ph/10000 3ph
• StecaGrid 8000+ 3ph/10000+ 3ph
The remote display allows setting of inverter parameters and display of inverter operat-
ing data.
30
734.144 | Z04 | 2012-11-22
EN